How to Guide
STEP 1 - SURFACE PREPARATION
First prepare your bike surface for adhesion by removing any impurities.
STEP 2 - REMOVE ADHESIVE BACKING
Gently fold back the adhesive backing from the decal.
STEP 3 - DECAL ALIGNMENT
Position the decal over the area of application. Start by aligning the top edge of the letter against the top edge of the frame text underneath. Check alignment and then gently adhere the top part of your decal.
STEP 4 - ADHERING DECAL
Under good lighting, once satisfied the top edge is aligned, gently and slowly apply the remaining letter working your way down and outward using the contour of the frame to bleed out any bubbling or wrinkling (if present).
STEP 5 - REMOVE CLEAR APPLICATION TRANSFER TAPE
Once satisfied the lettering has been applied, carefully remove the transfer tape.
STEP 6 - SEALING THE DECAL
Check the decal for lifting or bubbling on edges and corners. As before, firmly work your way from top to bottom, in an outwards fashion to edges, ensuring full adhesion.
